DELO Increases Intensity of LED Area Lamps for Light-curing Adhesives
DELO Industrial Adhesives has increased the intensity of its LED area lamps for light-curing adhesives. The upgrade is now available for the 400 nm variants of DELOLUX 20 and DELOLUX 202. Thus, both lamps nearly double their intensity and now reach up to 600 mW/cm.Bonding is particularly efficient when it is integrated into industrial manufacturing. Whenever short cycle times and reliable mass production processes are required, light-curing adhesives come into play.The increased intensity of the 400 nm area lamps allows much faster curing of many adhesives, and opens up new application areas for light curing. Now when curing components made of certain plastics that are opaque, a higher intensity can reach the adhesive to cure it properly.The lamps’ higher output intensity enables greater working distances, without changing the lamp dimensions. Therefore, it is also possible to irradiate bonding areas in sleeves or deep holes, and flexibly integrate the lamps into fully automated production cells. The new lamp heads are readily operated with existing control units. Even if an application does not require the high power lamp, the customer can still benefit from an efficient energy output and therefore a longer operating lifetime.“An increased intensity has numerous advantages. However, we developed these lamps to also irradiate bonding areas evenly. This aspect is often neglected, although it is a precondition for reliable adhesive curing”, says Robert Saller, Director Sales International at DELO.
相關閱讀
本站所有信息與內容，版權歸原作者所有。網站中部分新聞、文章來源于網絡或會員供稿，如讀者對作品版權有疑議，請及時與我們聯(lián)系，電話：025-85303363 QQ：2402955403。文章僅代表作者本人的觀點，與本網站立場無關。轉載本站的內容，請務必注明"來源：林中祥膠粘劑技術信息網（m.nongfusping.com）".
網友評論
加載中...
